You are here: Home >> Profile >> Quality Control and Assurance System >> Reliability Condition

Quality Control and Assurance System

Quality Control System Quality Control & Assurance
Reliability Condition Quality Assurance Flow Chart

 

 

 

LCD Module(Consumer Type)

No
Item
Test Condition
Applicable Standard
1
High Temperature Storage
Storage at 802°C 96~100hrs
surrounding temperature, then store at normal condition 4hrs
 
MIL-202E
2
Low Temperature Storage
Storage at-302°C 96~100hrs
surrounding temperature, then storageat normal condition 4hrs
 
MIL-202E
3
High Temperature/
Humidity Storage
1. Storage 96~100hrs 60°C, 90~95%RH Surrounding Temperature, Then Storage at normal condition 4hrs.(Polarizer may fail in this environment)
Or
2. Storage 96~100hrs 402°C,90~95%RH
Surrounding Temperature, Then Storage at normal condition 4hrs.
 
MIL-202E
4
Temperature Cycling
-20°C 25°C 70°C 25°C
MIL-202E
5
Vibration Test
10~55Hz(1 Minute)1.5mm direction eath time by
X,Y And Z Direction x (Each 2hrs)
 
MIL-202E
6
Drop Test
Packing Weight (kg)
Drop High (cm)
MIL-810E
0 ~ 45.4
122
45.4 ~ 90.8
76
90.8 ~ 454
61
Over 454
46
7
ESD Test
Air Discharge:
Apply 6KV with 5 times discharge
for each polarity +/-.
Contact Discharge:
Apply 250V with 5 times discharge
for each polarity +/-.
IEC 6100-4-2
Testing location:
Around the face of LCD
Testing location:
1. Apply to bezel.
2. Apply to Vdd, Vss. 

 

Contact

USA office
26231 Enterprise Court, Lake Forest, CA 92630 , USA
 
1-(949)859-8168
1-(949)859-8118
 

Quality Control System Quality figures promineutly as a fundamental value in all aspects of our manufacturing. Our strength is consistently maintainad through our effective manufacturing and prowrement quality system. We offer LCD module, including: TN/STN/FSTN LCM, COG LCD, TFT LCM, FSLCD, graphic LCM, character LCM, custom LCD, custom LCM, TFT embedded display, custom LCD display and projective capacitive touch display , resistive touch display, EMS.